Angel Wax ANGELWAX Single Item Sponge Buffer (Red (Hard)) Polisher Car Wash Car Accessories Convenient Goods Vehicle

Angelwax Red Sponge Buff

It is mainly used for hard-type polishing.

Features

• Abrasiveness: As a hard type, it has relatively strong abrasiveness and is suitable for removing light scratches, car wash scratches, and buff marks.
• Versatility: It can be used with a wide range of polishers, from single-action to dual-action polishers.
• Durability: It is also highly durable and can be used repeatedly.

It is mainly available in sizes such as 75 mm, 125 mm, and 150 mm.

• Caution against over-polishing: Red buffs are highly abrasive, so polishing the same area for too long or applying too much pressure may remove too much paint or, in the worst case, expose the primer. Particular care should be taken on areas with thin paint, such as along press lines.
• Heat generation: Polishing generates frictional heat. Excessive heat can cause the compound to bake onto the paint or damage the paintwork (making scratches harder to remove or causing them to reappear later). If the surface feels hot to the touch, stop working and wait for the paintwork to cool before resuming.

2. Preparation and Environment

• Washing and masking: Before polishing, thoroughly wash the vehicle and completely remove any embedded iron particles, sand, or dust. If these remain, they can cause new scratches. Also, use masking tape to carefully protect areas that the buff should not touch, such as rubber and plastic parts and chrome window trim.
• Test in an inconspicuous area: When using it for the first time, always perform a test polish in an inconspicuous area, such as the inside of a door, to see how the combination of the buff and compound affects the paintwork.

3. Precautions During Work

• Amount of compound: Apply an appropriate amount of compound. Too much or too little can reduce efficiency or cause unevenness.
• Even pressure and speed: Do not press the polisher too hard against the bodywork. Keep the entire buff evenly in contact with the surface and move it continuously at a constant speed. Staying in one place can cause heat buildup and over-polishing.
• Cleaning the buff: During work, the buff will collect compound residue and removed paint. If this accumulates, it can reduce abrasiveness or cause new scratches. Clean the buff frequently or replace it with a clean one. It can be cleaned using a tornado gun or by hand.
• Checking the finish: While polishing, change the angle of the light and check from various angles to carefully inspect for missed polishing, buff marks, or aurora marks (linear scratches that appear shiny and iridescent when held up to the light). Particular care should be taken with dark-colored vehicles, as buff marks are more noticeable.

4. Post-Work Care

• Washing the buff: If a used buff is left with abrasive or paint residue attached, its performance may deteriorate or it may cause scratches during the next use. Always wash it after use and let it dry completely before storing it.

By following these precautions, you can maximize the performance of the Angelwax Red Sponge Buff and achieve a beautiful finish safely and efficiently. If you are unsure, it is recommended to start in an inconspicuous area or try a buff and compound with lower abrasiveness first.